4 Port OLT Optical Line Terminal FTTH Compatible with OEM Optical
ONT
Description
The E04 series is a high integrated, medium capacity box ERON OLT
switching equipment developed for the operator access and
enterprise park network. The product follows IEEE802.3ah technical
standard and meets the requirements of EPON OLT equipment in "YD/T
1475-2006 access network technical requirements". It has good
openness, large capacity, high reliability and complete software
functions. It is widely used in the construction of network
coverage, special network construction, enterprise network park
access and other access network construction.
Advantage
- EPON:OLT follows the technical standard of IEEE802.3ah and China
telecom. (YD/T 1475-2006)
- Capacity: Each PON supports up to 64 terminals, the whole device
supports up to 256 ONUs under full configuration.
- Uplink: support electrical and optical modules, can be flexibly
configured according to different networking.
- Dimension: 1U cassette save space, low power consumption and save
cost.
- Optical Line Protection: support automatically switch when the line
is debug.
- High reliability: supports dual power supply(Default single power
supply).
Feature
Aggregation layer switch.
16K MAC address table.
8uplink ports, port aggregation through the largest available 8G
uplink bandwidth.
Complete network management functions
Support flexible DBA, up and down traffic speed.
Support IP ToS, IEEE802.1Q
Port-based traffic control, traffic shaping.
Support ONU automatic identification, auto-discovery, and
auto-registration.
Single link to support the automatic loop-back test function.
VLAN powerful features, including VLAN Stacking, Trunk,
Translation.
Flexible and controllable multicast support, support IGMP snooping.
Support ACL /QoS
Technical Specification
| Model | E04 |
| DDR | 512M |
| FLASH | 16M |
| Size (L*W*H) | Product size:442mm×260mm×44mm Package size:520mm×372mm×87mm |
| Weight | <5kg |
| Uplink | QTY | 8 |
| Copper | 4*10/100/1000Mauto-negotiable,RJ45 |
| SFP | 4 SFP slots |
| PON | QTY | 4 |
| PhysicalInterface | 4 SFP slots |
| Connector Type | 1000BASE-PX20+/PX20++/PX20+++ |
| Max splitting ratio | 1:64 |
| Management Ports | CONSOLE port/NMS PORT |
| Power Input | AC: 100V～240V AC 47/63Hz |
| Support standard | IEEE 802.3ah EPON IEEE802.3(10Base-T) IEEE802.3u(100Base-TX) IEEE802.3z(1000BASE-X) IEEE802.3ab(1000Base-T) IEEE802.1Q(VLAN) IEEEE802.1d(STP) IEEEE802.1W(RSTP) IEEE802.1p(COS) IEEE802.1x(Port Control) IEEE802.3x(flow-control) Each OLT interface supports at most 64 ONU； Transmission distance of each OLT is at most 20Km |
| PON function | Support auto register and confirm Blacklist and whitelist onu DBA configure P2P ONU authorization |
| Layer 2/3 function | VLAN,QinQ,link convergency, broadcast strom control Support at most 4094 VLAN;performance statistic 16K MAC address;mac address management Port mirror / Static Trunk Support RSTP Storm control Support IGMP Snooping/proxy Support 512 router hosts Support 64 router subnets Limit quantity of maximum user at each port Port isolation Packe storm control ACL access control based on data stream QoS based on port, VID, TOS and MAC address; Encrytion of PON port transmitting data Support 802.1X authentication |
| Configuration and Management | SNMP/NMS WebGUI management CLI, SNMP, TELNET,cluster etc. SSHv1/v2 Software and bootrom upgrade by TFTP and FTP Local server syslog to record system log Chinese/English command prompt Ping and traceroute Debug/Log management User management; Alarm management. |
| Lightning | Service port has lightning protection |
| Maintenance | Telnet remote maintenance |
| Temperature | -10℃～60℃ |
| Humidity | 5%～95% |
