| PON Specification |
| Interface | PON Interface | 1 EPON optical interface |
| Meet 1000BASE-PX20+ standard |
| Symmetric 1.244Gbps upstream/downstream 2.488gGbit/s, |
| SC single-mode fiber |
| split ratio: 1:64 |
| Transmission distance 20KM |
| User Interface | 3*10/100Mauto-negotiation;1*10/100/1000 |
| Full/half duplex mode |
| RJ45 connector |
| Auto MDI/MDI-X |
| 100m distance |
| 1 RF output |
| Female F-Type Connector |
| Power Interface | 12V DC Power supply |
| Performance Parameters | PON | Wavelength: Tx 1310nm, Rx1490nm |
| Optical | Tx Optical Power: -2~4dBm |
| Parameter | Rx Sensitivity: -27dBm |
| Saturation Optical Power: -3dBm |
| Connector Type: SC/APC |
| Optical Fiber: 9/125um single-mode fiber |
| Data Transmission | PON Throughput: Downstream 950Mbps; Upstream 930Mbps |
| Parameter | Ethernet: 100Mbps |
| Packet Loss Ratio: <1*10E-12 |
| latency: <1.5ms |
| Business | Layer 2 wire speed switching |
| Capability | Support VLAN TAG/UNTAG,VLAN conversion |
| Support Port-based speed limitation |
| Support Priority classification |
| Support storm control of broadcast |
| Support link detection |
| Network Management | Management | Support IEEE802.3 QAM, ONU can be remotely managed by OLT |
| Mode | Support Remote management through Telnet,TR069, |
| Local management |
| Management | Status monitor, Configuration management, Alarm management, |
| Function | Log management |
| Indicator | LED Indicator | PWR, SYS,PON, LAN1~LAN4, CATV,WIFI |
| Physical Features | Shell | Plastic casing |
| Power | External 12V 1A AC/DC power supply adapter |
| Power consumption: <5.5W |
| Dimension and Weight | box Dimension:209mm(L) x 165mm(W) x 69mm (H) |
| Item weight:0.4kg |
| Environmental | Operating temperature: 0 to 50 ºC |
| Specifications | Storage temperature: -40 to 85 ºC |
| Operating humidity: 10% to 90% (Non-condensing) |
| Storage humidity: 10% to 90% (Non-condensing) |
| WIFI Specification |
| Performance parameters | Frequency | 2.4-2.4835GHz |
| Throughput | IEEE 802.11b: 11Mbps |
| IEEE 802.11g: 54 Mbps |
| IEEE 802.11n: 300Mbps |
| Frequency | 2.412 ~ 2.472 GHz |
| Channel | 13*Channel, configurable to meet the standard of USA, Canada, Japan
and China |
| Modulation | DSSS , CCK and OFDM |
| Coding | BPSK, QPSK, 16QAM and 64QAM |
| RF receive sensitivity | 802.11b: -82dBm @ 1 Mbps; -80dBm @ 2 Mbps; |
| -78dBm @ 5.5 Mbps; -76dBm @ 11 Mbps |
| 802.11g: -82dBm @ 6 Mbps; -81dBm @ 9 Mbps; |
| -79dBm @ 12 Mbps; -77dBm @ 18 Mbps; |
| -74dBm @ 24 Mbps; -70dBm @ 36 Mbps; |
| -66dBm @ 48 Mbps; -65dBm @ 54 Mbps |
| RF output lever | 802.11b: 16.5 ±1dBm |
| 802.11g: 13 ± 1dBm @ 54 Mbps; 14 ± 1dBm @ 48 Mbps; 15 ± 1dBm @ 6 ~
36 Mbps |
| 802.11n: 13 ± 1dBm @ 54 Mbps; 14 ± 1dBm @ 48 Mbps; 15 ± 1dBm @ 6 ~
36 Mbps |
| Encryption Mode | 802.11i security: WEP-64/128, TKIP (WPA-PSK) and AES (WPA2-PSK) |
| CATV Specification |
| Wavelength | Nm | 1310/1490/1550 +/- 10nm |
| Receiving optical power | dBm | -18~+2 |
| Reflection loss | dB | >50 |
| Optical connector | - | SC/APC |
| Fiber Type | - | Single mode |
| Forward channel | dB | >40 |
| Reflection channel | dB | >22 |
| Frequency range | MHz | 45~1000MHz |
| In-band flatness | dB | -1 |
| Output reflection loss | dB | >14 |
| Nominal output level | dBuV | 75+-1 |
| AGC range | dBm | +15~-5dBm |
| Accessories |
| Wire | 0.5M |
| Power Adaptor | 1*External Power adaptor |
| User Manual | 1*Single sheet user manual |
